Rollschnalle, geschweißt, vernickelt, für 60 mm

Doppel-Hohlniete (2-teilig) in der Farbe vernickelt. Oben und unten geschlossen. Grundmaterial Stahl, vernickelt galvanisiert. Maße: Ø Kopf: 10 mm, Stiftlänge Unterteil: 10 mm Lieferumfang: 1 Stück Hohlniet-Oberteil (Kappe) 1 Stück Hohlniet-Unterteil (Stift)

JUMBO-Hohlniet (2-teilig) in der Farbe vernickelt.Grundmaterial Stahl, vernickelt galvanisiert.Maße: Ø Kopf: 12 mm, Stiftlänge Unterteil: 22 mmLieferumfang:1 Stück Hohlniet-Oberteil (Kappe)1 Stück Hohlniet-Unterteil (Stift)

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 12 x 8 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 20 x 12 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 13 x 8 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 11 x 7 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 23 x 13 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 18 x 12 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 10 x 6 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 7 x 5 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 6 x 4 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 16 x 9 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 30 x 10 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 5 x 2 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 28 x 18 mm

Oval Drive Punch (ovoid, no slot) for punching out leather, rubber, cardboard and other soft materials.Made in Germany - based on highest standards of quality for professional usage.Strong, drop forged shape, cutting edge is hardened to HV 480 - 558 kp/mm2 (HRC 47-52).Finest carbon steel material C 35–C 45.Cutting edge tapered on the inside with polished barrel, shaft powder-coated in red.The use of soft-face hammer and plastic cutting block is recommended.Scope of delivery:1 pc. Oval Drive Punch Ø 15 x 10 mm

Schonhammer für Locheisen in Profi-Qualität - rückschlagfrei für sehr kraftvolle Schläge.Die perfekte Ergänzung für das professionelle Arbeiten mit unseren Locheisen. Geräuscharm und gelenkschonend, schont das Werkzeug und sorgt für satten Schlag. Schlageinsätze aus Spezialnylon mit maximaler Festigkeit.Schwingungsdämpfender, ergonomisch geformter, sehr stabiler und lackierter Hickorystiel.Stielschutzhülse beugt Fehlschlägen vor.Polierter, lackierter Hickory-Stiel, Länge 335 mm, Gewicht 560 g .Köpfe: PA12 Nylon schlagfest, 35 mmLieferumfang:1 Stück Schonhammer

Schlagunterlage für Locheisen in Profi-Qualität.Die perfekte Ergänzung für das professionelle Arbeiten mit unseren Locheisen.Schont das Werkzeug und schont den Untergrund.Material: PE-HMW.Maße: 240 x 180 x 10 mm.Lieferumfang:1 Stück Schlagunterlage